Connecting the drain line, O note – LG WT1201CV Manuel d'utilisation
Page 15
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
INSTALLATION INSTRUCTIONS 15
Connecting the drain line
Secure the drain hose to the drain to prevent moving and
leaking.
O NOTE----------------------------------------
• The drain hose should be properly secured. Failure to
properly secure the drain hose can result in flooding
and malfunction.
• Total height of the hose end should not exceed 96
inches (243.8 cm) from the bottom of the washer.
• The drain must be installed in accordance with any
applicable local codes and regulations.
• Make sure that drain hose is not stretched, pinched,
crushed, or kinked.
Using a laundry tub
Bend the end of the drain hose to the desired shape and
support it on the edge of the laundry tub. Use a tie strap to
secure the drain hose in place.
Using a standpipe
1 Insert the end of the drain hose into the standpipe.
2
Use a tie strap to secure the drain hose in place.
1
39"
(99 cm)
_L1
Cable Tie
Cable Tie