Sony CPD-1303 - Manuel (Page 7)

[8] RGB input selectors
Depending on the RGB output of the equipment you have connec'
ed, set these switches to one of the following four positions.
ANALOG: For microcomputers
having analog RGB output, such
as those using the PGA card.
The position of the left switch
has no effect when the right
switch is set to ANALOG.
NORM D1 D2 DIGiTAL
□
ANALOG
NORM-DIGITAL: For microcom­
puters having TTL RGB output,
such as the IBM 3270.
NORM D1_02 DIGITAL
ANALOG
DI-DIGITAL: For microcom­
puters having TTL RGB and I
signal output, such as the IBM
PC. AT and XT using the stand­
ard color graphics card.
D2-DIGITAL: For TTL graphics
cards on the IBM PC, AT and
XT. (automatic adjustment be­
tween EGA, CGA and MDA)
NORM D1 D2 DIGITAL
ANALOG
NORM D1 D2 DIGITAL
ANALOG
[g] RGB IN (input) connector (9-pin D-sub)
Allows a microcomputer having either analog or digital RGB out­
put to be connected. Refer to page 8.
[l^ AC IN connector
Connect to the AC outlet with the supplied AC power cord.