Precautions, Checklist, Installation – Sony CPD-1303 Manuel d'utilisation

Page 28: Warning on power connection, Maintenance

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

Precautions

Installation

Prevent internal heat build-up by allowing adequate air circulation. Do not place the
unit on surfaces (rugs, blankets, etc.) or near materials (curtains, draperies) that
may block the ventilation holes.
Do not install the unit near heat sources such as radiators or air ducts, nor in a
place subject to direct sunlight, excessive dust, mechanical vibration or shock.

Do not place the unit near equipment which generates magnetism, such as a
converter or high voltage power lines.

Warning on Power Connection

Use the supplied power cord.

To disconnect the power cord, wait for at least 30 seconds after turning off the
power for discharging the static electricity on the CRT display surface.
After the power has been turned on, the CRT is demagnetized for approximately 5

seconds. This generates a strong magnetic field around the bezel which may affect
the data stored on magnetic tape or disks near the bezel. Place such magnetic
recording equipment and tapes/disks apart from this unit.

The socket-outlet shall be installed near the equipment and shall be easily

accessible.

Maintenance

Checklist

Clean the cabinet, panel and controls with a soft cloth lightly moistened with a mild
detergent solution. Do not use any type of abrasive pad, scouring powder or solvent,

such as alcohol or benzine.

Before using this monitor, please make sure that the following items are included in
your package;

Monitor (1)

Power cord (1)

Video signal cable (1)

Ülo-

Universa! MacView adapter
with manual (1)

Warranty Card (1)
This Operating Instruction manual (1)

Monitor Adjustment Reference Card (1)

Advertising