Sony CPD-1303 - Manuel (Page 32)

Adjustments
A number of digital controls are provided to allow you to optimize the display
parameters to your preferences. In addition to the following adjustment directions, a
Monitor Adjustment Reference Card has been provided for your convenience. Please
place it in an easily accessible location near your monitor.
Normal Operation Mode
Brightness Adjustment
C
o
Using the o adjustment buttons,
Press “+” for more brightness.
Press for less brightness.
Picture Contrast Adjustment
ZZI
3
Using the 3 adjustment buttons.
Press “+” for more contrast.
Press for less contrast.
■ When the limit value is reached, the POWER SAVING indicator will begin to flash.
■ Press the RESET button to recall the factory settings for brightness and picture
contrast. See “Caution” below.
■ Note: The brightness and contrast settings are common for all video timings.
Adjustment Mode
To leave Normal Operation Mode and enter Adjustment Mode, press and hold the
SELECT button until the “CENT” LED indicator illuminates. You can then press the
SELECT button to choose any of the five adjustments and use the “+” and buttons
as described on the following pages to fine tune your monitor.
The Centering, Size and Pincushion Geometry adjustments are unique to each mode
while the Raster Rotation, Convergence, and Color Temperature adjustments are
common to all modes.
■ When the limit value is reached, the POWER SAVING indicator will begin to flash.
■. Adjustments will be stored automatically and the monitor will return to the Normal
Operation Mode after 8 seconds of non-use.
CAUTION:
In adjustment mode, pressing the RESET button recalls the factory settings tor Size,
Centering and Pincushion GeometryJor the current mode, and Raster Rotation,
Convergence and Color Temperature, which is common to all modes. Pressing the
CTRL and RESET buttons together clears all user-defined data in memory.
«