Cannot print, If an error message appears, Cannot read – Sony DPP-MS300 Manuel d'utilisation
Page 48: File error, File protect, Format error, Locked, Ms/pc card error
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Troubleshooting (continued)
Cannot print.
-> Insert the print paper (page 17).
Try printing again after removing the print paper
if the print paper has emerged from the paper
outlet at the rear.
■> See "If the indicators are on" on page 50.
If you are using the optional automatic feeder,
ch^ that the feeder has paper (page 18).
4
Insert the print cartridge (page 15).
4
Use the correct set of print cartridge and print
paper (page 14).
The beeps sound.
■» Check that you operate with the correct
procedures.
■> See "If the indicators are on" on page 50.
If an error message appears
CANNOT READ
There is no image file recorded on the "Memory
Stick." Insert a "Memory Stick" on which
readable images are recorded.
FILE ERROR
The selected image is broken.
FILE PROTECT
■» The selected image is protected.
FORMAT ERROR
•> The inserted "Memory Stick" or PC card is not
formatted. Format the "Memory Stick" or PC card.
LOCKED
■> The "Memory Stick" or PC card is in the write
protect status. Set it in the write enable status and
then record the image.
MS/PC CARD ERROR
■> The inserted "Memory Stick" or PC card is
defective or the PC card is not of a compatible
type. Insert the correct "Memory Stick" or PC
card.
48® For Your Information