To display the playing channels, Display, Current – Sony DVP-S500D Manuel d'utilisation
Page 41: The case of dolby digital (ac-3) 5.1 ch, Rear component 2, Front component 2 + center component 1, Lfe component 1, Note, Dolby digital surround, Cd cel
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Dolby Digital Surround
To display the playing channels
You can display the playing channels on the screen.
In Dolby Digital (AC-3) format, the signals from
monaural to 5.1 channel can be recorded on a DVD.
Depending on the DVD the numbers of the recorded
channels are different.
© CD
0
© © © @ ©
© ® ® 0 ©
0®
©
O
CID ® C3Ó
Press DISPLAY repeatedly until the channel display
appears.
DISPLAY
DVD
TITLE:
CHAPTER:
SUBTITLE:
AUDIO:
ANGLE:
PLAY^
1 : 32 : 55
<CHAPTER>
32 ( 50 )
30 ( 50 )
ENGLISH ( 32 )
ENGLISH ( 8 )
lOOtBYDIGITAL 3 / 2. 1
.1 ( 9 )
(TTfcT rii
Current
- audio
format*
Current
playing
channel**
“PCM", "MPEG" or "DOLBY DIGITAL" is
displayed. In "DOLBY DIGITAL" case, the
channels in the playing track are displayed by
-number-as follows:
The case of Dolby Digital (AC-3) 5.1 ch:
Rear component 2
DOLBY DIGITAL 1] / È- h]
S:
Rear (monaural) - the rear component of
the Pro Logic processed stereo signal.
LFE: - displayed only when the LEE (Low
Frequency Effects) signal is playing
If "S" is displayed in gray, you can enjoy the surround
effect when you set "MODE" under "5.1 OUTPUT
SETUP 2" to "PRO LOGIC," "VES A" or "VES B" in
the setup display. This affects only when the current
audio format is "DOLBY DIGITAL 2/0."
The display examples are as follows:
•PCM (stereo)
AUDIO:
ENGLISH ( 8 )
PCM
ANGLE:
1 ( 9 )
CD CEl
PRO LOGIC (PCM)
AUDIO:
ENGLISH { 8 ) ■
PCM
ANGLE:
1 ( 9 ) P B O LOGIC
tD !c3 E
m
Dolby Digital (AC-3) 5.1ch
AUDIO:
ENGLISH ( 8 )
DOIBYDIGITAL 3 / 2. 1
ANGLE:
1 ( 9 )
[D ED n:
IMI [LS] is]
Front component 2
+ Center component 1
LFE component 1
You can find Dolby Surround-encoded software by
looking at the packaging
Use discs with the
logo. In order to enjoy Dolby
Digital (AC-3) playback you must use discs bearing this
logo.
Note
The DOLBY DIGITAL indicator turns off when:
- you insert a.CP or a-VIDEO CD.
- the current audio format is PCM or MPEG Audio.
The playing channel shows the signals from 5.1
OUTPUT connectors whether the speakers exist or
not. The letters in the channel display mean the
following:
1:
Front (L)
R:
Front (R)
C:
Center (monaural)
LS:
Rear (L)
RS:
Rear (R)
41
EN