Metrohm 798 MPT Titrino - Manuel (Page 76)

3.1. General rules
798 MPT Titrino
72
Status conditions of the global $R:
$R .Mode.XXXX.QuickMeas:
Quick manual measurement from the initial status in mode XXXX.
$R .Mode.DET .Inac:
Instrument in the DET mode, inactive.
$R .Mode.MET .Inac:
Instrument in the MET mode, inactive.
$R .Mode.SET .Inac:
Instrument in the SET mode, inactive.
.Cond.Ok:
Instrument in the SET mode, conditioning, endpoint reached.
.Cond.Prog:
Instrument in the SET mode, conditioning, endpoint not reached.
$R .Mode.MEAS .Inac:
Instrument in the MEAS mode, inactive.
$R .Mode.CAL .Inac:
Instrument in the CAL mode, inactive.
$R .Assembly.Bur.ModeDis:
Buret in the DIS mode, inactive.
$R .TIP.Inac:
Instrument in TIP, inactive.
Status conditions of the global $S:
$S .Mode.XXXX.QuickMeas:
Quick manual measurement from the initial status in mode XXXX.
The instrument gives the status from which it has been stopped. The detailed
status information is therefore identical to for the global status $G.
Violation of monitored limits with action "end" give the status message
$S.Mode.XXX.Inac;EYYY.