Rockwell Automation 2080-PS120-240VAC Micro800 Programmable Controllers External Power Supply - Manuel (Page 11)

Micro800™ Programmable Controller External AC Power Supply 11
Publication 2080-IN001A-EN-P - September 2010
Power consumption
(Output power) 38.4W @ 100V AC, 38.4W @ 240V AC
Power dissipation
(Input power) 45.1W @ 100V AC, 44.0W @ 240V AC
Isolation voltage 250V (continuous), Primary to Secondary: Reinforced Insulation Type
Type tested for 60s at 2300V AC primary to secondary and 1480V AC primary to
earth ground.
Output ratings 24V DC, 1.6A, 38.4W max.
Enclosure type rating Meets IP20
Wire size 0.32... 2.1 mm² (22...14 AWG) solid copper wire or
0.32... 1.3 mm² (22...16 AWG) stranded copper wire
rated at 90 °C (194 °F ) insulation max
Terminal screw
torque 0.5…0.6 Nm (4.4…5.3 lb-in)
(using a Phillips-head or 2.5 mm (0.10in.) flat-blade screwdriver)
Wiring category
(2) 2 - on power ports
Insulation stripping
length 7 mm (0.28 in)
North American
temp code T4A
(1)
Any fluctuation in voltage source must be within 85V...264V. Do not connect the adapter to a power
source that has fluctuations outside of this range.
(2)
Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation
Wiring and Grounding Guidelines, publication
1770-4.1 .
General
Attribute Value