Carter-Hoffmann CGM24 - Manuel (Page 3)

3
UNPACKING AND INSPECTION
1. Remove the cabinet from shipping carton, ensuring that all packing mate-
rials and protective plastic has been removed from the unit.
2. Inspect all components for completeness and condition.
3. If any freight damage is present, a freight claim must be filed immediately
with the shipping company. See freight damage procedure below.
4. Freight damage is not covered under warranty.
5. Check to insure all components are included: cabinet, instruction packet
and additional accessories.
6. Read operation instructions completely.
7. Appliance should be thoroughly cleaned before use. See CLEANING
INSTRUCTIONS on page 6 in this manual.
This appliance should be
thoroughly cleaned prior
to use.
See the CLEANING
INSTRUCTIONS in
this manual.
NOTE: DO NOT discard
the carton or other
packing materials until
you have inspected the
appliance for hidden
damage and checked it
for proper operation.
Refer to SHIPPING
DAMAGE CLAIM
PROCEDURE on
bottom of this page.
FREIGHT DAMAGE PROCEDURE
NOTE: For your protection, please note that equipment in this shipment was carefully inspected and pack-
aged by skilled personnel before leaving the factory. Upon acceptance of this shipment, the transportation
company assumes full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED:
1. VISIBLE LOSS OR DAMAGE: Be certain that any visible loss or damage is noted on the freight bill or
express receipt, and that the note of loss or damage is signed by the delivery person.
2. FILE CLAIM FOR DAMAGE IMMEDIATELY: Regardless of the extent of damage. Contact your
dealer immediately.
3. CONCEALED DAMAGE: If damage is unnoticed until the merchandise is unpacked, notify the trans-
portation company or carrier immediately, and then file a “CONCEALED DAMAGE” claim with them.
This should be done within fifteen (15) days from the date the delivery was made to you. Be sure to
retain the container for inspection.
Carter-Hoffmann cannot assume liability for damage or loss incurred in transit, freight damage is not cov-
ered under warranty. We will, however, at your request, supply you with the necessary documents to sup-
port your claim.
NOTE: The technical content of this manual, including any wiring diagrams, schematics, parts breakdown
illustrations and/or adjustment procedures, is intended for use ONLY by qualified technical personnel.