Aquascape LED 3 Watt Bullet Spotlight - HR 2013 (98927) Manuel d'utilisation

Year, De 1 an, De 2 ans

Advertising
background image

LEGAL WARNINGS

Except as stated in the warranty, there are no other representatives or warranties related to the

product or its use. THE USER SHALL DETERMINE THE SUITABILITY OF THE PRODUCT FOR THE USER’S

INTENDED USE, AND THE USER ASSUMES ALL RISKS AND LIABILITIES WHATSOEVER IN CONNECTION

THEREWITH. Seller and manufacturer’s only obligation is to repair and or replacement of submersible

light housing as stated below. ALL IMPLIED WARRANTIES ARE HEREBY EXCLUDED, INCLUDING, BUT

NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PUR-

POSE. Neither seller nor the manufacturer shall be liable for any injury loss, or damage whether direct,

incidental, or consequential arising out of the use or inability to use the product.
To reduce the risk of electrical shock, all wiring and junction connections should be made per local

codes. Requirements may vary depending on usage and location.

1

YEAR

WARRANTY

1

GARANTIE

DE 1 AN

2

YEAR

WARRANTY

2

GARANTIE

DE 2 ANS

3

YEAR

WARRANTY

3

GARANTIE

DE 3 ANS

1

YEAR

WARRANTY

1

GARANTIE

DE 1 AN

2

YEAR

WARRANTY

2

GARANTIE

DE 2 ANS

3

YEAR

WARRANTY

3

GARANTIE

DE 3 ANS

The 3-Watt 12 Volt LED Bullet Spotlight is war-

ranted against defective materials and work-

manship for a period of 12 months from the date

of purchase by the user. Contact the installer or

place of purchase if the 3-Watt 12 Volt LED Bullet

Spotlight should fail within the warranty period.

Warranty shall be totally null and void in the event

the 3-Watt 12 Volt LED Bullet Spotlight is abused,

misused, or used for a purpose other than for

which the product is intended. No warranty

applies to the light bulb used with the housing.

WARNING

It is recommended whenever working in or near water to have all electrical devices

plugged into a ground fault circuit interrupter (GFCI) that has been installed by a

licensed electrician.
Do not put stake through liner. COVER TO LIGHT MUST BE TIGHT AT ALL TIMES TO PREVENT
ANY LEAKING .

3-Watt 12 Volt LED

Bullet Spotlight

PACKAGE INCLUDES:

• 3-Watt 12 Volt LED Bullet Spotlight

with 15 ft. cord

• Adjustable plastic light stand and stake.

• Low Voltage Transformer (sold separately)

Installation Instructions

Installing the Light

It is easiest to install and conceal the 3-Watt 12 Volt LED
Bullet Spotlight prior to putting the gravel in the pond
and stream. Find a desirable location for the light(s). We
suggest positioning the light(s) so they are facing away
from the main viewing area. Double-check to make sure
that the lens cover is fastened tightly down. Depending on
the installation, the 3-Watt 12 Volt LED Bullet Spotlight
can be used in or out of water. If being used out of water
attach the light to the stake, if being used in the stream
area the light should be used with the light stand, or
without a stand by tucking the fixture between rocks.
Simply take the cord and plug into the transformer, plug
in transformer and enjoy! The 3-Watt 12 Volt LED Bullet

Spotlight can also be wired directly into a pre-existing
low voltage lighting system. In order to do this, cut off the
plug on the light and splice directly into the low voltage
wire.

Replacing the Light Bulb

Troubleshooting

• Make sure that the plug is inserted all the way into

the transformer. If light is wired into a low voltage

lighting system make sure all of the connections

are sound.

• Make sure that no water has seeped into light

housing unit.

• Check light bulb.
• Bulb life can be greatly increased by setting timer

on transformer, so the light only operates during

the desired times.

1. Make sure all power is shut off to the light before

changing the bulb. The light housing must be

above water to properly service the light bulb.

2. Unscrew the lens cover from the front of the

light housing unit.

3. Remove the LED bulb.
4. Insert the new bulb

5. Screw the lens cover onto the light housing.

Make sure there is no dirt or debris on the

assembly prior to reassembling.

6. Test to make sure light works
7. Position light back into pond.

Replacement Parts

Replacement Bulbs for 3-Watt 12 Volt

LED Bullet Spotlight

#98490

3 LED Replacement Bulb (white)

Made in China

Aquascape, Inc.

St. Charles, IL 60174 • Brampton, ON L6T 5V7

www.aquascapeinc.com

Item #98927.122012

©2012 Aquascape, Inc. • All Worldwide Rights Reserved

IDD 09087535-AI 080181

Advertising