West Bend Back to Basics SR1000 - Manuel (Page 8)

8
OPERATION
Use and Care (Assembly)
To use your smoothie maker, begin by assembling the mixing container. smoothie maker smoothie maker
1. Position the rubber gasket down onto the circular fl at surface in the blade base.
2. Screw blade base on the bottom of the mixing container by twisting the blade
base counter-clockwise until tightened onto the mixing container. Make sure that container container
the blade base is tightly fastened to the container and that the rubber gasket is
properly compressed between the container and the blade base.
3. Place the lid onto the top of the mixing jar and twist the lid clockwise until it
locks into position. The lip on the lid should line up with the pour spout on the
container. This will engage the safety switch. Place the clear lid cap in the center
of the lid or place the stir stick through the center of the lid if blending liquids
or frozen drinks. NOTE: The lid and container must be locked in place for the
blades to spin.
4. Place the mixing container onto the motor base so that the bottom of the blade
base is sitting fl at on the motor base. Twist clockwise until the container locks
into place. The indicator light on the control panel will light up indicating the unit
is ready to turn on. The dispensing valve should line up with the auto-powered
dispensing button.
5. Once the lid and the goblet are locked into place the ready light will come on
indicating all safety switches are engaged.
6. Plug in the cord. Your smoothie maker is now ready to use! NOTE: When all
interlock switches are active the indicator light will come on. This indicates the
unit is ready to turn on. If indicator light is not on, repeat steps 3 & 4.
Mixing Container
Stir Stick
Blender Cap
Blade Base
Lid Cap
Dispensing Valve
Auto-Powered Dispensing
Button
Lid
Motor Base
Drip Tray
O Rings
Gasket
Ready Light