Philips Éveil Lumière Manuel d'utilisation

Page 14

Advertising
background image

Question

Answer

Perhaps you switched off the alarm function by pressing the ALARM

button.
Perhaps the lamp is defective. Replace the lamp (see chapter

‘Replacement’).

Why can I not switch on

the lamp again

immediately after I

switched it off?

You have to wait 3 seconds for the lamp to dim. During this time, the

3

button does not work.

Why do I hear no sound

when the alarm goes

off?

Perhaps you set the sound level too low. Turn the volume control to a

higher sound level.

Perhaps you switched off the alarm function by pressing the ALARM

button.
If you selected the radio as alarm sound (HF3462/HF3461 only), the

radio may be defective. Press the radio button after you switch off the

alarm to check if the radio works. If it does not work, contact the

Philips Customer Care Centre in your country.

Why does the radio

(HF3462, HF3461

only) not work?

The radio function is probably defective. Contact the Philips Customer

Care Centre in your country.

Connect the external antenna if you have not yet connected it. See

section ‘Radio’ in chapter ‘Using the appliance’.

Why does the radio

(HF3462, HF3461

only) produce a

crackling sound?

Perhaps the broadcast signal is weak. Search for the correct signal (see

chapter ‘Using the appliance’).

The alarm went off

yesterday. Why did it not

go off today?

Perhaps you switched off the alarm function by pressing the ALARM

button. Set the alarm for the next day and switch off the wake-up

alarm sound and light the next day by pressing the 3 button (see

chapter ‘Using the appliance’).
Perhaps you set the sound and/or light level to a too low setting. Set a

higher sound and/or light level.
Perhaps there has been a power failure that outlasted the capacity of

the backup system. After a long power failure, the display shows an

incorrect clock time and the alarm time is 00.00. Set the correct clock

time (see chapter ‘Preparing for use’) and the correct alarm time (see

chapter ‘Using the appliance’).

Why does the light

wake me too early/too

late?

Perhaps the light level you have set is not appropriate for you. Try a

lower light level if you wake up too early or a higher light level if you

wake up too late. For most people, the light is effective at settings 9-20

(HF3451) or 7-15 (HF3462/HF3461).
Perhaps you woke up too late because the appliance is at a lower level

than your head. Make sure the appliance is located at such a height

that the light is not blocked by your bed, duvet or pillow.

EnglisH

1

Advertising