Control panel and features – Whirlpool WFW86HEBW Manuel d'utilisation

Page 4

Advertising
background image

4

CONTROL PANEL AND FEATURES

Not all features and cycles are available on all models.
NOTE: The control panel features a sensitive surface that

responds to a light touch of your finger. To ensure your selections

are registered, touch the control panel with your finger tip, not

your fingernail. When selecting a setting or option, simply touch

its name.

Spin

This washer automatically selects the spin speed based

on the cycle selected. Some preset speeds can be

changed.
• Faster spin speeds mean shorter dry times, but may

increase wrinkling in your load.

• Slower spin speeds reduce wrinkling, but will leave

your load more damp.

Soil

The Soil setting (wash time) is preset for each wash

cycle. For most loads, use this preset soil level. When

you change the soil setting, the cycle time will increase

or decrease in the Estimated Time Remaining display.
For heavily soiled and sturdy fabrics, use the Soil setting

to select more wash time. For lightly soiled and delicate

fabrics, use the Soil setting to select less wash time.

Lower soil level settings will help reduce tangling and

wrinkling.
Presoak

Touch to add a Presoak time of your choice to a wash

cycle. Items will gently tumble through the detergent and

water for the selected time to help loosen tough stains.

OPTIONS

Touch to activate additional wash options or additional

features on the washer. Not all options are available on all

models.

Steam Clean

The Steam Clean option adds additional soak and wash

time to many cycles to help remove tough stains, as well

as a steam boost for added cleaning power.
An integrated heater helps to maintain optimal wash

temperatures. See the “Cycle Guide” for cycles that

allow the Steam Clean option.
Extra Rinse

Activate this option to add an extra rinse to most cycles.
NOTE: Some cycles include this feature as a default.

See “Cycle Guide” for details.

6

A

3

4

Models WFW86HE and WFW61HE

2

1

5

B

E

A

C

D

6

POWER

Touch to turn the washer on and off. Touch to stop/cancel

a cycle at any time.

WASH CYCLE KNOB

Use your Wash Cycle knob to select available cycles on your

washer. Turn the knob to select a cycle for your laundry load.

An LED will light up for the cycle selected.
NOTE: The Clean Washer LED will flash when the washer

has run 30 wash cycles as a reminder to run the Clean

Washer cycle.
See “Cycle Guide” for detailed descriptions of cycles.

START

Touch and hold until the light above START comes on to

start a cycle, or touch once while a cycle is in process to

pause it. If you want to add a garment, you can touch START

when the “Add Garment” LED is on.

DELAY WASH

Use

+ and to delay the start of the wash cycle by up to

12 hours. To turn off Delay Wash, use

+ and to set the

delay time to “0,” or touch POWER.

LED DISPLAY AND SETTINGS

When you select a cycle, its default settings will light up and

the Estimated Time Remaining will be displayed. Factors

such as load size, wash temperature, and water pressure

may affect the time shown in the display during the cycle.

Tightly packing garments, unbalanced loads, or excessive

suds may cause the washer to adjust the cycle time, as well.
Touch the desired option along the bottom of the display to

adjust settings. See “Cycle Guide” for available settings on

each cycle. Not all settings are available with all cycles.

Cycle Status Lights

For details, see “Cycle Status Lights”.
Wash Temp

The recommended wash temperature is preset for each

cycle. You may also select a wash temperature based

on the type of fabric and soils being washed. For best

results, follow the garment label instructions. All wash

temperatures feature a cold rinse.

1

2

3

4

5

B

Advertising
Ce manuel est liée aux produits suivants: