Press push to start to begin cycle, Set cycle settings and options, Select the desired cycle – Whirlpool WED4870BW Manuel d'utilisation

Page 8: Select cycle signal (if desired)

Advertising
background image

8

6.

Press PUSH to START to

begin cycle

Push and hold the PUSH to START knob to begin the cycle.
Promptly remove garments after cycle has completed to reduce

wrinkling. Use the Wrinkle Shield™ feature to avoid wrinkling

when you are unable to remove a load from the dryer as soon

as it stops.

4.

Set cycle settings and options

Select cycle settings and options by turning the knob to the

desired position.
NOTE: Not all options and settings are available with all cycles.
Temperature
Turn the TEMPERATURE knob to change the drying

temperature setting. See “Setting the Drying Temperature”.
Wrinkle Shield™ feature (on some models)

n

Get 90 minutes of heat-free, periodic tumbling at the end of

a cycle. Turn the WRINKLE SHIELD™ knob to select on or

off at any time before the cycle has ended.

n

On some models with a WRINKLE SHIELD™ cycle will

automatically get 40 minutes of heat-free, periodic tumbling

at the end of a cycle.

3.

Select the desired cycle

Select the desired cycle for your load. See the Cycle Guide

for more information about each cycle.
ACCUDRY™/AUTOMATIC DRY Cycles
You can select a different dryness level, depending on your

load, by turning the knob to dryness level.
Selecting More or Very Dry, ENERGY PREFERRED, or Less Dry

automatically adjusts the dryness level at which the dryer will

shut off. Once a dry level is set, it cannot be changed without

stopping the cycle.
ACCUDRY™/AUTOMATIC DRY cycles give the best drying in

the shortest time. Drying time varies based on fabric type, load

size, and dryness setting.
NOTE: More or Very Dry removes more load moisture.

ENERGY PREFERRED is used for a starting point for

ACCUDRY™ cycles. Choose ENERGY PREFERRED for

optimal energy savings. Less Dry removes less moisture and

used for loads you may want to put on a hanger to complete

drying.

5.

Select Cycle Signal (if desired)

Turn the CYCLE SIGNAL knob to select the desired setting

(On or Off). The Cycle Signal produces an audible sound

when the drying cycle is finished. Promptly removing clothes

at the end of the cycle reduces wrinkling.
NOTE: When the Wrinkle Shield™ setting is selected and the

Cycle Signal is on, the tone will sound every 5 minutes until

the clothes are removed, or the Wrinkle Shield™ setting ends.

Advertising
Ce manuel est liée aux produits suivants: