Check your vent system for good air flow, Use accudry, Good air flow – Whirlpool WED4870BW Manuel d'utilisation

Page 4: Maintain good air flow by

Advertising
background image

4

CHECK YOUR VENT SYSTEM FOR GOOD AIR FLOW

Good air flow

Along with heat, dryers require good air flow to efficiently

dry laundry. Proper venting will reduce your drying times

and improve your energy savings. See “Installation

Instructions.”
The venting system attached to the dryer plays a big role in

good air flow.
Service calls caused by improper venting are not covered

by the warranty and will be paid by the customer, regardless

of who installed the dryer.

Maintain good air flow by:

Good

Better

USE ACCUDRY

/AUTOMATIC DRY CYCLES FOR BETTER

FABRIC CARE AND ENERGY SAVINGS

Use the ACCUDRY™/Automatic Dry cycles to provide the most energy savings and enhanced fabric care from the dryer.

During ACCUDRY™/Automatic Dry cycles, drying air temperature or moisture level are sensed in the load. This sensing occurs

throughout the drying cycle and the dryer shuts off when the load reaches the selected dryness. The Energy Preferred cycle will

provide optimal energy savings.
With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to over-drying.

Use Timed Dry for the occasional damp load that needs a little more drying time or when using the drying rack.

n

Cleaning your lint screen before each load.

n

Replace plastic or foil vent material with 4" (102 mm)

diameter heavy, rigid vent material.

n

Use the shortest length of vent possible.

n

Use no more than four 90° elbows in a vent system;

each bend and curve reduces air flow.

n

Remove lint and debris from the exhaust hood.

n

Remove lint from the entire length of the vent system at

least every 2 years. When cleaning is complete, be sure

to follow the “Installation Instructions” supplied with your

dryer for final product check.

n

Clear away items from the front the dryer.

Advertising
Ce manuel est liée aux produits suivants: