Nokia Speakerphone HF-510 - Manuel (Page 14)

B a s i c u s e
14
4. Basic use
■ Copy contacts to the speakerphone
When the speakerphone is connected to a compatible mobile device
that supports the PBAP Bluetooth profile, you can copy the contacts
(names and phone numbers) from the internal memory of the device to
the speakerphone. When the speakerphone is connected to a compatible
device that supports the OPP Bluetooth profile, you can copy the
contacts to the speakerphone by sending them through a Bluetooth
connection from your device. For information about the Bluetooth
profiles supported by your device, see the device’s user guide of the
device.
To copy the contacts if your device supports the PBAP profile, turn the
volume wheel left until
is displayed, and press the answer/
end key. flashes during copying. If is displayed, try to copy
the contacts using the OPP profile.
To copy a contact if your device supports the OPP profile, select the
contact in your device, and send the contact to the speakerphone
through a Bluetooth connection. Sending several contacts using
the OPP profile takes longer than using the PBAP profile.
Copying may take a few minutes and is automatically stopped after
600 contacts; to stop copying manually when you use the PBAP profile,
press and hold the answer/end key. While the contacts are being copied,
you cannot use the contacts that you have previously copied to the
speakerphone.
If you want to update the contacts from your device to the
speakerphone, copy the contacts again. If you use the PBAP profile,
the previously copied contacts are replaced with the new ones.
The speakerphone supports three phone numbers per contact.
If a contact has more than three phone numbers saved in your
device and you want three particular numbers to be copied to the
speakerphone, save the three numbers as a new contact in your device.