Nokia Speakerphone HF-510 - Manuel (Page 13)

M o u n t i n g t h e s p e a k e r p h o n e i n a v e h i c l e
13
■ Attach to a dashboard
You can attach the speakerphone to the dashboard using the supplied
mounting device and adhesive pad.
1. Ensure that the surface where you attach the adhesive pad on the
dashboard is flat, dry, and free from dirt and dust.
2. Insert the catch on the mounting device
into the slot at the back of the
speakerphone (1). Rotate the
speakerphone clockwise until it locks into
place (2).
3. Peel off the protective sheet
from the adhesive side of the
pad (3), and press the pad
against the dashboard (4) so
that it stays firmly in place.
When you peel off the
protective sheet from the pad,
do not touch the adhesive side.
4. Peel off the protective sheet from the other
side of the pad, and press the suction cup on
the mounting device against the pad (5).
5. Turn the speakerphone to the desired
position (6).
6. Rotate the mounting device clockwise to
create a vacuum (7). Check that the suction
cup is firmly attached.
To detach the speakerphone from the mounting device, rotate it
anticlockwise.
To detach the mounting device from the dashboard, rotate the
mounting device anticlockwise, and pull the strap located on
the edge of the suction cup.