Nokia Speakerphone HF-510 - Manuel (Page 12)

M o u n t i n g t h e s p e a k e r p h o n e i n a v e h i c l e
12
■ Attach to a windscreen
You can attach the speakerphone to the windscreen using the supplied
mounting device.
1. Insert the catch on the
mounting device into the
slot at the back of the
speakerphone (1). Rotate
the speakerphone clockwise
until it locks into place (2).
2. Locate a safe mounting
surface on the windscreen,
and clean the surface
thoroughly withglass
cleaner and a clean towel.
If the ambient temperature is below +15°C (60°F), carefully warm
the surface and the suction cup with a hair dryer to ensure a firm
grip on the windscreen. Ensure that you do not heat the windscreen
excessively to avoid damaging it.
3. Press the suction cup of the mounting device against the windscreen
(3), and rotate the mounting device clockwise (4) to create a vacuum
between the suction cup and the windscreen. Check that the suction
cup is firmly attached.
4. Turn the speakerphone to the desired position.
To detach the speakerphone from the mounting device, rotate it
anticlockwise.
To detach the suction cup from the windscreen, rotate the mounting
device anticlockwise, and pull the strap located on the edge of the
suction cup.