Konica Minolta MS7000 MKII - Manuel (Page 24)

Installation
5-1
5 Installation
5.1 Installation
1 Turn the Guide Rail of the main unit
counterclockwise at 90 degrees.
2 Pull the Carrier to the let fully against
the Lower Frame, then insert it into
the main unit so that the cover on the
side of the Reel Shaft is to be in the
left side against the Lens Holder.
3 Align the arrow label with the front
side’s Guide Rail, and insert the
Lower Frame into the Guide Rail from
the right side.
Important!
Make sure that the Power ON/OFF Switch of the Microfilm Scanner
has been turned OFF before starting the installation or removal
procedure.
NOTE Be careful not to allow your
hands or the Connecting
Cord to be caught between
the machine and Carrier.
UC8_UG.book 1 ページ ２０１０年２月２５日 木曜日 午後１２時２９分