3 feeding the film – Konica Minolta MS7000 MKII Manuel d'utilisation

Page 20

Advertising
background image

Operation

3-3

3.3

Feeding the Film

1

Turn the Speed Control Knob
clockwise or counter-clockwise to
feed the film in the forward or reverse
direction. The film scanning speed is
determined by the turning angle of
the Speed Control Knob.

Important!

If you feed the film at high speeds,
pull the Carrier Handle forward
fully, then operate the Speed
Control Knob with the Film
Pressure Glass is open.

NOTE

If you release your hand
from the Speed Control
Knob, it will return to the
center position and the film
feeding will stop.

The film feeding speed in
relation to the rotation
angle of the Speed Control
Knob will depending on the
Film Pressure Glass (open
or close).

When the film is through
with being reeled and
stopped, the motor will
stop automatically after a
few seconds.

FOWARD

REVERSE

UC8_UG.book 3 ページ 2010年2月25日 木曜日 午後12時29分

Advertising
Ce manuel est liée aux produits suivants: