Konica Minolta MS7000 MKII - Manuel (Page 19)

Operation
3-2
3.2 Loading the Roll Film
1 Mount the Roll Film onto the Reel
Shaft and unwind the leading edge of
the film.
2 Take hold of the Carrier Handle and
pull it forward fully, then the Film
Pressure Glass will open.
3 Insert the leading edge of the film
between the Glasses.
4 Insert the leading edge of the film into
the slit in the Take-Up Reel and rotate
the Take-Up Reel two to three turns
so that the film leader is wound
around the Take-Up Reel.
NOTE Be sure to set the film so
that its winding direction is
to be clockwise.
The film will not be
correctly rewound if the
open reel roll film is
mounted in the opposite
direction.
NOTE Make Sure that the film
runs under the Left and
Right Guide Rollers.
UC8_UG.book 2 ページ ２０１０年２月２５日 木曜日 午後１２時２９分