Konica Minolta MS7000 MKII - Manuel (Page 18)

Operation
3-1
3 Operation
3.1 Selecting the Film Width 16/35mm
1 Release the Stopper Ring which
holds the Guide Roller.
2 Pull out the front part of the Guide
Roller, then reverse its directions and
insert again.
3 Hold the Guide Roller with the
Stopper Ring.
4 Change the direction of the other side
Guide Roller according to the above
procedure.
NOTE Be careful not to lose the
Stopper Ring when you
release it.
NOTE Be sure that both side
Guide Rollers are in the
same direction.
16mm Setting 35mm Setting
UC8_UG.book 1 ページ ２０１０年２月２５日 木曜日 午後１２時２９分