Napoleon Fireplaces High Country 6000 - NZ6000 - Manuel (Page 26)

W415-0594 / E / 10.19.12
26
AVERTISSEMENT
:
AIR COMBURANT SEULEMENT
W ARNING:
COMBUSTION AIR ONL Y
W ARNING: BLOWER
CONNECTION ONL
Y
AVERTISSEMENT
:
CONNEXION DE LA SOUFFLERIE
SEULEMENT
6.3 KEYSTONE INSTALLATION
A. Secure the faceplate to the appliance, using
the 12 screws supplied. Start all 12 screws,
then tighten evenly.
6.4 DOOR HANDLE INSTALLATION
RIGHT DOOR HANDLE (OPERATING)
-
Insert the door rod through the round hole
of the latch ensuring the fl at edge of the “D”
shaped hole points towards the hinges.
- Slide the end of the door rod through the
bushing at the top of the door as shown.
- Insert the handle shaft through the door and
the latch.
- Secure with 2 fl at washers and a nut.
- Feed the handle through the handle spacer
and into the handle shaft.
LEFT DOOR HANDLE (FIXED)
-
Insert the handle shaft through the door.
- Secure with a lock washer, 2 fl at washers and
a nut.
- Feed the handle through the handle spacer
and into the handle shaft.
See Note #2
Note #1:
You may need to move washers to the other side of
the latch to obtain suffi cient door seal.
Note #2:
The fi nal angle of the left door handle should mirror
the right door handle in the closed position. Tighten
the nut to secure the left handle at the desired angle.
Flat side of
“D” shape
Flat
Washers
Nut
Handle Spacer
Handle
Door
Rod
Bushing
Flat side of
“D” shape
Handle shaft
Latch
Flat Washers
Nut
Flat side
of “D”
shape
Handle
Spacer
Handle
Lock
Washer
Handle
Shaft