Playing back messages, Basic operations – Sony ICD-R100PC Manuel d'utilisation

Page 13

Advertising
background image

Basic Operations

13

GB

Notes

Due to the limitation of the IC recording system, this unit records in the
minimum recording unit of approx. 4 seconds in SP mode (approx. 10 seconds
in LP mode), therefore the following symptoms may occur.
• When a message is shorter than the minimum recording unit, it is still counted

as approx. 4 seconds (or approx. 10 seconds) so the remaining recording time
will decrease by more than the actual length of the message.

• When the message is longer than the minimum recording unit, the remaining

recording time will decrease by more than the actual length of the message if
it cannot be divided by the minimum recording unit without a remainder.

•The sum of the number on the counter (elapsed recording time) and the

remaining recording time may be less than the unit’s maximum recording
time (64 minutes in SP mode and 150 minutes in LP mode).

Remaining memory indication

During recording, the remaining memory indicator decreases one by one.

When the remaining time of recording reaches 5 minutes, the last one of
the indication flashes. When the remaining time of recording reaches 1
minute, the selected display mode (page 34) and “REMAIN” will flash one
after the other in the display window. When the memory is full, recording
automatically stops and “END” will flash in the display window with an
alarm sound. To continue recording, first erase some of the messages (page
18).

Notes

• If you press zREC/STOP when the memory is full, “END” will flash with an

alarm sound. Erase some of the messages before you start recording again.
(Page 18)

• If you press zREC/STOP after you have recorded 99 messages, “END” will

flash with an alarm sound. Select another file or erase some of the messages.
(Page 18)

The memory is
nearly full.

Flashing

Advertising