Sony MEX-1HD - Manuel (Page 26)

26
Storing only desired stations
— Manual Preset Memory
You can manually preset desired stations by
specifying the frequency.
The unit can store up to 20 FM stations and 10
AM stations.
1
Press (SOURCE) repeatedly to select
“FM” or “AM.”
2
Press (FUNCTION) repeatedly to
display the function menu “ SEEK”
and “SEEK .”
3
Press (F1) ( SEEK) or (F2)
(SEEK ) to tune in the station you
want to store.
4
Press (MENU) .
The menu display appears.
5
Rotate the R dial to select “Preset
Edit,” then press the R dial.
6
Rotate the R dial to select “Manual,”
then press the R dial.
7
Rotate the R dial to select the memory
number you want to store, then press
the R dial.
The normal reception display appears when
the station is stored.
Note
If you try to store another station on the same stored
number, the previously stored station will be erased.
Labeling a radio station
— Station Memo
You can assign a name to each radio station and
store it in memory. The name of the station
currently tuned in appears in the display. You can
assign a name using up to 31 characters per
station.
1
Tune in the station you want to assign
a name.
2
Press (MENU) .
The menu display appears.
3
Rotate the R dial to select “Name In,”
then press the R dial.
4
Rotate the R dial to select “Station
Memo,” then press the R dial.
5
Enter characters.
1 Rotate the R dial to select the
desired character type, then press
the R dial.
As you rotate the R dial, the item changes
as follows:
SOURCE MENU
FUNCTION
F1 F2
R dial
Item Explanation
ABC Alphabet (All caps)
abc Alphabet (Small caps)
1234 Numbers
! ? # Symbol
(OK) to store the characters entered
( <) to move the cursor to the left
( ,) to move the cursor to the right
(CLR) to erase a character
(NG) to cancel name editing
( ) to back to the character menu
MENU DSPL
R dial L dial