Sony TA-A1ES - Manuel (Page 14)

14 US
Preparing the amplifier and the remote
control
Connect the supplied AC power cord (mains lead) to the AC IN terminal
on the amplifier firmly, then connect the AC power cord (mains lead)
to a wall outlet.
 Before connecting speakers and audio equipment, make sure that you
disconnect the AC power cord (mains lead).
 Do not connect the AC power cord (mains lead) until all connections are
completed.
 Plug in the AC power cord (mains lead) securely. A poor connection may
cause unstable operations.
Press  to turn on the amplifier.
You can also turn on the amplifier using  on the remote control.
When you turn off the amplifier, press  again.
When the amplifier is on, the  indicator is lit in green.
When there is something wrong with the amplifier, it lights up in red.
Check for a short circuit of the speaker output, or a short circuit of the
headphone output. Remove the causes and turn on the amplifier
again.
Connecting the AC power cord (mains lead)
AC IN terminal
To a wall outlet
AC power cord (mains lead)
(supplied)
Some space is left between the plug
and the rear panel even when the AC
power cord (mains lead) is inserted
firmly. The cord is supposed to be
connected this way. This is not a
malfunction.
Notes
Turning on the amplifier
