Sony DR-BTN200 - Manuel

English
WARNING
To reduce the risk of electrical shock, do not open the cabinet. Refer servicing to qualified
personnel only.
Information
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type
and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment
and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels
of RF energy that are deemed to comply without testing of specific absorption ratio (SAR).
This Class B digital apparatus complies with Canadian ICES-003.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by
Sony Corporation is under license.
The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in
other countries.
Microsoft, Windows and Windows Vista are registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.
Other trademarks and trade names are those of their respective owners.
RECYCLING LITHIUM-ION BATTERIES
Lithium-Ion batteries are recyclable.
You can help preserve our environment by
returning your used rechargeable batteries to the
collection and recycling location nearest you.
For more information regarding recycling of
rechargeable batteries, call toll free
1-800-822-8837, or visit http://www.rbrc.org/
Caution: Do not handle damaged or leaking Lithium-Ion
batteries.
Precautions
On Bluetooth communication

Bluetooth wireless technology operates within a range of about 10 meters (30 feet).
Maximum communication range may vary depending on obstacles (human body, metal, wall, etc.) or
electromagnetic environment.
 The antenna is built into the unit as illustrated in the dotted line. The sensitivity of the Bluetooth
communication will improve by turning the direction of the built-in antenna to the connected
Bluetooth device.
The communication distance shortens when the obstacles are between the antenna of the connected
device and this unit.
Location of
built-in
antenna
 The following conditions may affect the sensitivity of Bluetooth communication.
– There is an obstacle such as a human body, metal, or wall between this unit and Bluetooth device.
– A device using 2.4 GHz frequency, such as a wireless LAN device, cordless telephone, or microwave
oven, is in use near this unit.
 Because Bluetooth devices and wireless LAN (IEEE802.11b/g) use the same frequency, microwave
interference may occur and resulting in communication speed deterioration, noise, or invalid
connection if this unit is used near a wireless LAN device. In such a case, perform the following.
– Use this unit at least 10 m (30 ft) away from the wireless LAN device.
– If this unit is used within 10 m (30 ft) of a wireless LAN device, turn off the wireless LAN device.
– Install this unit and Bluetooth device as near to each other as possible.
 Microwaves emitting from a Bluetooth device may affect the operation of electronic medical devices.
Turn off this unit and other Bluetooth devices in the following locations, as it may cause an accident:
– where inflammable gas is present, in a hospital, train, airplane, or a petrol station
– near automatic doors or a fire alarm
 This unit supports security capabilities that comply with the Bluetooth standard to provide a secure
connection when the Bluetooth wireless technology is used, but security may not be enough
depending on the setting. Be careful when communicating using Bluetooth wireless technology.
 We do not take any responsibility for the leakage of information during Bluetooth communication.
 Connection with all Bluetooth devices cannot be guaranteed.
– A device featuring Bluetooth function is required to conform to the Bluetooth standard specified by
Bluetooth SIG, Inc. and be authenticated.
– Even if the connected device conforms to the above mentioned Bluetooth standard, some devices
may not be connected or work correctly, depending on the features or specifications of the device.
– While talking on the phone hands free, noise may occur, depending on the device or
communication environment.
 Depending on the device to be connected, it may require some time to start communication.
On charging the unit

This unit can be charged using USB only. Personal computer with USB port, or USB Charging AC
Power Adaptor AC-UD10 (sold separately) is required for charging.
Others

Do not place this unit in a place exposed to humidity, dust, soot or steam, subject to direct sunlight,
or in a car waiting at a traffic signal. It may cause a malfunction.
 Using the Bluetooth device may not function on mobile phones, depending on radio wave conditions
and location where the equipment is being used.
 If you experience discomfort after using the Bluetooth device, stop using the Bluetooth device
immediately. Should any problem persist, consult your nearest Sony dealer.
 Listening with this unit at high volume may affect your hearing. For traffic safety, do not use this unit
while driving or cycling.
 Do not put weight or pressure on this unit as it may cause the unit to deform during long storage.
 Do not subject the unit to excessive shock.
 Clean the unit with a soft dry cloth.
 Do not expose the unit to water. The unit is not waterproof.
Remember to follow the precautions below.
– Be careful not to drop the unit into a sink or other container filled with water.
– Do not use the unit in humid locations or bad weather, such as in the rain or snow.
– Do not get the unit wet.
If you touch the unit with wet hands, or put the unit in a damp article of clothing, the unit may get
wet and this may cause a malfunction of the unit.
 The earpads may deteriorate due to longterm storage or use.
 If you have any questions or problems concerning this unit that are not covered in this manual, please
consult your nearest Sony dealer.
Specifications
General
Communication System
Bluetooth Specification version 3.0
Output
Bluetooth Specification Power Class 2
Maximum communication range
Line of sight approx. 10 m (30 ft)
1)
Frequency band
2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Modulation method
FHSS
Compatible Bluetooth Profiles
2)
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile)
HFP (Hands-free Profile)
HSP (Headset Profile)
Supported Codec
3)
SBC 4) , AAC 5)
Supported content protection method
SCMS-T
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)
Included items
Wireless stereo headset (1)
Micro-USB cable (approx. 50 cm (1.64 ft)) (1)
Reference Guide (this sheet) (1)
Other documents (1 set)
Recommended accessory
USB Charging AC Power Adaptor: AC-UD10 (sold separately)
1) The actual range will vary depending on factors such as obstacles between devices, magnetic fields
around a microwave oven, static electricity, reception sensitivity, antenna’s performance, operating
system, software application, etc.
2) Bluetooth standard profiles indicate the purpose of Bluetooth communication between devices.
3) Codec: Audio signal compression and conversion format
4) Subband Codec
5) Advanced Audio Coding
Wireless Stereo Headset
Power source
DC 3.7 V: Built-in lithium-ion rechargeable battery
Mass
Approx. 157 g (5.54 oz)
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Usage hours
Communication time (including music playback time): Max. 40 hours
Standby time: Max. 800 hours
Charging time
Approx. 4.5 hours
(The communication time will be about 24 hours when it is charged for 2 hours.)
Charging temperature
5 °C to 35 °C (41 °F to 95 °F)
Receiver
Type
Closed, Dynamic
Driver units
30 mm
Frequency response
10 Hz - 24 kHz
Microphone
Type
Electret condenser
Direction characteristic
Omni directional
Effective frequency range
100 Hz – 4,000 Hz
System requirements for battery charge using USB
Personal Computer with pre-installed with any of the following operating systems and USB port:
Operating Systems
(when using Windows)
Windows ® 7
Home Basic / Home Premium / Professional / Ultimate
Windows Vista ® (Service Pack 2 or later)
Home Basic / Home Premium / Business / Ultimate
Windows ® XP (Service Pack 3 or later)
Home Edition / Professional / Media Center Edition 2004 / Media Center Edition 2005
(when using Macintosh)
Mac OS X (version.10.3 or later)
Design and specifications are subject to change without notice.
Wireless
Stereo Headset
Casque
stéréo sans fil
Reference Guide GB
Guide de référence FR
DR-BTN200
©2013 Sony Corporation Printed in China
http://www.sony.net/
4-446-294-42(1)