Location safety, Cooktop safety, 10 location safety – Samsung NX58H9500WS-AA Manuel d'utilisation

Page 10: 10 cooktop safety

Advertising
background image

English - 10

Location safety

WARNING To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the
following precautions.

• This range is for indoor, household use only.

Do not install the range in areas exposed to the
weather and/or water.

Do not install the range in a place which is exposed

to a strong draft.

• Select a level, well-constructed floor that can support

the range’s weight. Synthetic flooring, such as
linoleum, must withstand 180 °F (82 °C) temperatures
without shrinking, warping, or discoloring. Do

not install the range directly over interior kitchen
carpeting unless a sheet of ¼ inch plywood or a similar
insulator is placed between the range and carpeting.

• Select a location where a grounded, 3- prong outlet is easily accessible.
• If the range is located near a window, do not hang long curtains or paper blinds on that

window.

• For the range to ventilate properly, make sure the range’s vents are not blocked, and that there

is enough clearance at the top, back, sides, and underneath the range. The vents allow the
necessary exhaust for the range to operate properly with correct combustion.

Make sure the wall coverings around the range can withstand heat up to 200 °F (93 °C)

generated by the range.

• Cabinet storage above the surface of the range should be avoided. If cabinet storage above

the range is necessary: allow a minimum clearance of 40 inches (102 cm) between the cooking
surface and the bottom of cabinets; or install a range hood that projects horizontally a minimum
of 5 inches (12.7 cm) beyond the bottom of the cabinets.

Cooktop safety

WARNING To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the
following precautions.

Make sure all burners are off when not in use.
Do not use aluminium foil to line the grates or any

part of the cooktop.

Do not leave burners unattended on medium or high

heat settings.

• Before igniting, make sure all burner caps are properly

in place and all burners are level.

Always use the LITE position when igniting the burners and make sure the burners have ignited.

If ignition fails, turn the knob to OFF and wait until the gas has dissipated.

Manual User_NX58H9500WS_DG68-00566A-01_EN_NonPF.indd 10

2014-07-30 1:01:27

Advertising
Ce manuel est liée aux produits suivants: