STEINEL IS 240-120 - Manuel (Page 6)

www.steinel.net (800) 852-4343 www.steinel.net (800) 852-4343
10
Wiring
When installing, make sure
power has been switched
off at the breaker and
check that the circuit is
dead with a voltage tester.
The leads consist of three
wires:
Black = Hot
White = Neutral
Red = Load (switched hot
for fi xture)
Connect the white wire
from the sensor to the
neutral (usually white).
Connect the black wire
from the sensor to the
120 VAC hot (usually
black). Connect the red
wire from the sensor to the
hot input wire of the fi xture
(usually black). ( See
wiring diagram.)
11
Wiring
NEUTRAL
HOT
Local OFF
Switch (optional)
LINE (BLACK)
NEUTRAL (WHITE)
LOAD (RED)
L
O
A
D
L
O
A
D L
O
A
D
LINE (BLACK) NEUTRAL (WHITE) LOAD (RED) LINE (BLACK) NEUTRAL (WHITE) LOAD (RED)
Local OFF
Switch (optional)
HOT