STEINEL IS 240-120 - Manuel (Page 5)

www.steinel.net (800) 852-4343 www.steinel.net (800) 852-4343
8
Mounting
Gasket
Nut
Cover plate
with 1/2 inch
knockouts
Standard
junction box
4 inch
watertight
box
Gasket
Watertight
threaded
cover plate
Standard box
installation
Watertight box
installation
Standard
junction box
Cover plate
with 1/2 inch
knockouts
Nut
Gasket
Gasket
Watertight
threaded
cover plate
4 inch
watertight
box
9
Mounting
Installation
Ensure use of the correct
enclosure and confi rm
power is off at the circuit
breaker.
When mounting in
an interior space to a
cover plate with a 1/2”
knockout: Place wires
and 1/2” threaded
nipple through the
1/2” knockout of the
coverplate and secure
with the lock nut. The
provided rubber gasket
should be located
between the back of
the sensor and front of
the cover plate. Wire
the sensor and secure
the cover plate to the
junction box.
When mounting in an
exterior space to a
watertight cover plate
and box: Place wires
through the threaded 1/2”
knockout of the cover
plate and tighten. Align
the cover plate screw
holes with the watertight
box and position the
sensor so that the lens is
facing the ground and is
level. Wire the sensor and
secure the cover plate
and gasket to the junction
box.