Kolpin 26400 - Utility Gear Rail System - Manuel (Page 5)

Rev. 03
Plate Usage:
1. The plates can be use in the below orientations to better accommodate your machine(s) and how
you want to manage the limited space available.
2. Slots allow for fine adjustments in the bracket to allow you to be more versatile with your
accessories.
3. The Mounting Base Plate is to be used on the C-Clamp that is included. It also works with the Gear
Lock and Load Bracket (P/N 26300). Please see website for more information on the Gear Lock and
Load Bracket.
Mounting Instructions:
1. To mount the two brackets together use the 4 – ¼” x ¾” Bolts provided. Attached using the (3)
horizontal slots in the bracket. The Mounting Bracket Plate should be used so it is under the Mounting
Base Plate. See above picture.
2. Mount the bracket to the C-Clamp by attaching the remaining (4) Truss Head bolts to the four
corners of the C-Clamp.
3. The C-Clamp then slides onto the 26400 Utility Gear Rail System. Tighten the C-Clamp using the
Star Turn Knob provided.
4. Accessorize as necessary.
Kolpin Outdoors, Inc.
205 N. Depot Street, Fox Lake, WI 53933
Phone #: (877) 9KOLPIN or (920) 928-6514
www.kolpinpowersports.com [email protected]
8
2
7