JVC KD-R811 - Manuel (Page 40)

40 ENGLISH
Troubleshooting
Symptom Remedy/Cause
General
Sound cannot be heard from the
speakers. • Adjust the volume to the optimum level.
• Make sure the unit is not muted/paused (
6).
• Check the cords and connections.
The unit does not work at all. Reset the unit. ( 3)
“Connect Error” appears on the
display. Remove the control panel, wipe the connector,
then attach it again. (
3)
“AUX IN” cannot be selected. Check the <Source Select>
= <Aux Source>
setting. ( 31)
Nothing appear on the display. Check the <User> color settings. ( 32, 33)
FM/AM
SSM automatic presetting does
not work. Store stations manually.
Static noise while listening to the
radio. Connect the aerial firmly.
“AM” cannot be selected. Check the <Source Select>
= <AM Source>
setting. ( 31)
Disc playback
Disc cannot be played back. Insert the disc correctly.
• CD-R/CD-RW cannot be played
back.
• Tracks on the CD-R/CD-RW
cannot be skipped.
• Insert a finalized CD-R/CD-RW.
• Finalize the CD-R/CD-RW with the component
which you used for recording.
• Disc can neither be played back
nor ejected.
• “No Eject“ appears on the display.
• Unlock the disc. ( 11)
• Eject the disc forcibly. ( 3)
Disc sound is sometimes
interrupted. • Stop playback while driving on rough roads.
• Change the disc.
• Check the cords and connections.
Disc cannot be recognized (“No
Disc,” “CD Loading Error,” or “Eject
Error” flashes). Eject the disc forcibly. ( 3)
“Please Eject“ appears on the
display. This occurs sometimes due to over-heating. Eject
the disc or change to another playback source.
EN38-45_KD-R811_003A_2.indd 40 EN38-45_KD-R811_003A_2.indd 40 12/24/09 9:35:44 AM 12/24/09 9:35:44 AM