JVC KD-R641 Manuel d'utilisation

Page 15

Advertising

STEERING

WHEEL

REMOTE

KD-R647

KD-R641 / KD-R547 / KD-R541 /

KD-R449

Light blue/yellow

KD-R641 only

Wiring connection

Signal cord
(not supplied)

Remote wire
(not supplied)

Rear ground terminal

To the steering wheel remote control adapter

Fuse (10 A)

To Blue/white
wire of the wiring
harness D

Aerial terminal

(Not available for

KD-R447 / KD-R443 / KD-R442 / KD-R441)

JVC Amplifier

Part list for installation

( Ч2 )

( Ч1 )

A Faceplate

B Mounting sleeve

C Trim plate

D Wiring harness

E Extraction key

Front output

Rear/subwoofer output

IMPORTANT: A custom wiring harness (separately
purchased) which is suitable for your car is
recommended for connection.

If your car has an ISO terminal

If your car does NOT have an ISO terminal

( or )

ISO connector

* Custom wiring harness (separately purchased)

For some VW/Audi or Opel (Vauxhall)
automobiles
You may need to modify the wiring of the supplied
power cord D as illustrated.

If the unit does not turn on with modified wiring 1,
use modified wiring 2 instead.

Y: Yellow

R: Red

Original wiring

Modified wiring 1

Modified wiring 2

B1/B2

Purple

ª / Purple/black ·:

Rear speaker (right)

B3/B4

Gray

ª / Gray/black ·:

Front speaker (right)

B5/B6

White

ª / White/black ·:

Front speaker (left)

B7/B8

Green

ª / Green/black ·:

Rear speaker (left)

To mobile phone system
(Brown)

Yellow: Battery

Blue/white: Remote wire

Orange/white: Car light control
switch

Red: Ignition (ACC)

Black: Earth (ground)
connection

ENGLISH

EN_KD-R647[E_EE]001A_f.indd 13

8/13/12 5:07:43 PM

Advertising