JVC KD-R621 - Manuel (Page 16)

16 ENGLISH
Menu item Selectable setting, [Initial: Underlined]
DIMMER
DIMMER SET AUTO : Changes the display and button illumination between the Day/Night
adjustments in <BRIGHTNESS>/<COLOR SETUP> setting when you turn off/on the car
headlights *
2 . / ON : Selects the Night adjustments in <BRIGHTNESS>/<COLOR SETUP>
setting for the display and button illumination. / OFF : Selects the Day adjustments in
<BRIGHTNESS>/<COLOR SETUP> setting for the display and button illumination.
BRIGHTNESS DAY [ 23 ] / NIGHT [ 11 ] : Selects the display and button illumination brightness
level [
00 — 31] for day and night.
DISPLAY
SCROLL * 3 ONCE : Scrolls the displayed information once. / AUTO : Repeats scrolling (at 5-second
intervals). /
OFF : Cancels.
(Pressing DISP for more than one second can scroll the display regardless of the setting.)
TAG DISPLAY ON : Shows the Tag information while playing MP3/WMA tracks. / OFF : Cancels.
PRO EQ For settings, see page 14.
AUDIO
FADER * 4, * 5 R06 — F06 [ 00 ] : Adjusts the front and rear speaker output balance.
BALANCE * 5 L06 — R06 [ 00 ] : Adjusts the left and right speaker output balance.
LOUD ON : Boost low and high frequencies to produce a well-balanced sound at a low volume
level. /
OFF : Cancels.
VOL ADJUST –05 — +05 [ 00 ] : Presets the volume adjustment level of each source (except
“FM”), compared to the FM volume level. The volume level will automatically increase or
decrease when you change the source. Before adjustment, select the source you want to
adjust. (“VOL ADJ FIX” appears on the display if “FM” is selected as the source.)
SUB.W ON : Turns on the subwoofer output. / OFF : Cancels.
SUB.W LPF LOW 55Hz / LOW 85Hz / LOW 120Hz : Frequencies lower than
55 Hz/85 Hz/120 Hz are sent to the subwoofer.
SUB.W LEVEL 00 — 08 [ 04 ] : Adjusts the subwoofer output level.
HPF ON : Activates the High Pass Filter. Low frequency signals are cut off from the front/rear
speakers.
/ OFF : Deactivates (all signals are sent to the front/rear speakers).
BEEP ON / OFF : Activates or deactivates the keypress tone.
* 2 The illumination control lead connection is required. (See “Installation/Connection Manual.”) This setting
may not work correctly on some vehicles (particularly on those having a control dial for dimming). In this
case, change the setting to any other than <DIMMER AUTO>.
* 3 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
* 4 If you are using a two-speaker system, set the fader level to “00.”
* 5 This adjustment will not affect the subwoofer output.
EN02-21_KD-R621[E]f.indd 16 EN02-21_KD-R621[E]f.indd 16 11/15/10 4:20:40 PM 11/15/10 4:20:40 PM