JVC KD-SD80 - Manuel (Page 26)

About USB device/SD memory
card
 When connecting a USB cable, use the USB 2.0
cable.
 You cannot connect a computer or portable
HDD to the USB input terminal of the unit.
 Connect only one USB device to the unit at a
time. Do not use a USB hub.
 USB devices equipped with special functions
such as data security functions cannot be used
with the unit.
 Do not use a USB device/SD memory card with
2 or more partitions.
 This unit cannot recognize a USB device whose
rating is other than 5 V and exceeds 1 A.
 This unit may not recognize a memory card
inserted into the USB card reader.
 This unit may not play back files in a USB
device properly when using a USB extension
cord.
 Depending on the shape of the USB devices
and connection ports, some USB devices may
not be attached properly or the connection
might be loose.
 Operation and power supply may not work as
intended for some USB devices.
 The maximum number of characters for:
– Folder names: 25 characters
– File names: 25 characters
– MP3 Tag: 128 characters
– WMA Tag: 128 characters
– WAV Tag: 128 characters
 This unit can recognize a total of 20 000 files,
2 000 folders (999 files per folder including
folder without unsupported files), and of 8
hierarchies. However, the display can only
show until 999 folders/files.
Cautions
 Do not pull out and attach the USB device/SD
memory card repeatedly while
“READING” is
shown on the display.
 Electrostatic shock at connecting a USB device/
SD memory card may cause abnormal
playback of the device. In this case, disconnect
the USB device then reset this unit and the USB
device.
 Do not leave a USB device/SD memory card in
the car, expose to direct sunlight, or high
temperature. Failure to do so may result in
deformation or cause damages to the device.
 Do not bend, drop or wet the SD card.
 Insert the SD card properly to avoid read error
problems.
Additional information
26 |ޓENGLISH
2012/1/19ޓ19:13:44 KD-SD80BT_E_EN