JVC KD-SD631 Manuel d'utilisation

Page 15

Advertising
background image

Menu item

Selectable setting (Initial: [XX])

AUDIO

VOL ADJUST
(Volume adjust)

-05 — +05

[00]: Presets the volume adjustment level of each source,

compared to the FM volume level. Before adjustment, select the source you
want to adjust. (“VOL ADJ FIX” appears if “FM” is selected.)

L/O MODE
(Line output
mode)

Select if the REAR/SW terminals are used for connecting the speakers or
subwoofer (through an external amplifier).
SUB.W: Subwoofer
[REAR]: Speakers

SUB. W *6
(Subwoofer)

OFF: Cancels.
[ON]: Turns on the subwoofer output.

SUB.W LPF *7
(Subwoofer low-
pass filter)

LOW 55Hz/MID 85Hz/[HIGH 120Hz]: Audio signals with frequencies
lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.

SUB.W LEVEL *7
(Subwoofer level)

00 — 08

[08]: Adjusts the subwoofer output level.

HPF *7
(High-pass filter)

ON: Activates the High Pass Filter. Low frequency signals are cut off from
the front/rear speakers.
[OFF]: Deactivates. (All signals are sent to the front/rear speakers.)

BEEP
(Keytouch tone)

[ON]/OFF: Activates or deactivates the keypress tone.

TEL MUTING *8
(Telephone
muting)

ON: Mutes the sounds while using the cellular phone (not connected
through KS-BTA100).
[OFF]: Cancels.

AMP GAIN *9
(Amplifier gain)

LOW POWER: VOLUME 00 — VOLUME 30 (Select if the maximum power of
each speaker is less than 50 W to prevent damaging the speakers.)
[HIGH POWER]: VOLUME 00 — VOLUME 50

TUNER

SSM

For settings,

' page 6. (Displayed only when the source is “FM”.)

AF-REG *10

For settings,

' page 7.

NEWS-STBY *10
(News standby)

ON/[OFF]: Activates or deactivates NEWS Standby Reception. (Displayed
only when the source is “FM”.) (

' page 7)

P-SEARCH *10
(Programme
search)

SEARCH ON/[SEARCH OFF]:
Activates Programme Search (if <AF-REG> is set to <AF ON> or
<AF-REG ON>) or deactivates.

MONO
(Monaural mode)

Displayed only when the source is “FM”.
[OFF]: Enables stereo FM reception.
ON: Improves the FM reception but stereo effect will be lost.

*6

Displayed only when <L/O MODE> is set to <SUB.W>.

*7

Displayed only when <SUB.W> is set to <ON>.

*8

This setting does not work if <BT ADAPTER> is selected for <R-AUX> of <SRC SELECT>.

*9

The volume level automatically changes to “VOLUME 30” if you change to <LOW POWER>
with the volume level set to higher than “VOLUME 30”.

*10 Only for FM Radio Data System stations.

Menu operations

ENGLISH

ޓ|

15

2011/12/7

ޓ1:56:19

KD-SD631_E_EN

Advertising