JVC KD-R841 Manuel d'utilisation
Page 15
13
Bluetooth settings
1
Press and hold MENU.
2
Turn the volume knob to select [BLUETOOTH], then press the knob.
3
Turn the volume knob to make a selection (see the following table), then press the knob.
Repeat
step
3 until the desired item is selected.
4
Press MENU to exit.
Default: XX
PHONE *
1
CONNECT / DISCONNECT: Connects or disconnects the Bluetooth phone or Bluetooth audio
player.
AUDIO
APPLICATION
CONNECT / DISCONNECT: Connects or disconnects the JVC Smart Music Control *
2
in the smart
phone.
DELETE PAIR
Selects the registered (paired) device to delete.
P.BOOK WAIT
Copies up to 400 numbers from the phonebook memory of a connected phone to the unit via OPP.
SET PINCODE
Changes the PIN code (up to 6 digits). (Default PIN code: 0000)
1 Turn the volume knob to select a number.
2 Press E / F to move the entry position.
Repeat steps 1 and 2 until you finish entering the PIN code.
3 Press the volume knob to confirm.
AUTO CNNCT
ON: Connects automatically with the Bluetooth device when the unit is turned on. ; OFF: Cancels.
INITIALIZE
YES: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). ;
NO: Cancels.
INFORMATION
PH CNNT DEV / AU CNNT DEV / APP CNT DEV *
3
: Displays connected phone/audio/application
device name. ; MY BT NAME: Displays the unit name (JVC UNIT). ; MY ADDRESS: Shows address
of this unit. ; BT VERSION: Shows the Bluetooth version of this unit.
*
1
[CONNECT] will not be displayed if two Bluetooth phones are connected at the same time.
*
2
JVC Smart Music Control is designed to view JVC car receiver status and perform simple
control operations on Android smart phones.
For JVC Smart Music Control operations, visit JVC website:
<http://www3.jvckenwood.com/english/car/index.html> (English website only).
*
3
Displayed only when a Bluetooth phone/audio player/application is connected.
BLUETOOTH®
Bluetooth audio player
Operations and display indications may differ according to their
availability on the connected device.
To
Do this
Playback
1
Press L SOURCE to select BT AUDIO.
2
Operate the Bluetooth audio player to
start playback.
Pause or resume
playback
Press
MENU (or
on RM-RK52).
Select group or folder
Press 1
∞ / 2 5 (or 5 / ∞ on RM-RK52).
Reverse/forward skip
Press E / F (or
2 / 3 on RM-RK52).
Reverse/fast-forward
Press and hold E / F (or
2 / 3 on
RM-RK52).
Repeat play
Press
6 B repeatedly to make a
selection.
TRACK RPT, ALL RPT, RPT OFF
Random play
Press
5 A repeatedly to make a
selection.
GROUP RND, ALL RND, RND OFF
ENGLISH
EN_KD-R841BT[E]_f.indd 13
EN_KD-R841BT[E]_f.indd 13
10/31/12 9:35:57 AM
10/31/12 9:35:57 AM