JVC KD-R35 Manuel d'utilisation

Page 16

Advertising
background image

16

ENGLISH

Category

Menu item

Selectable setting, [

Initial: Underlined

]

AUDIO

VOL ADJUST
Volume adjust
(For KD-R412/
KD-R411/KD-R35)

VOL ADJ –05 —
VOL ADJ +05
[ VOL ADJ 00 ]

: Preset the volume adjustment level of

each source (except FM), compared to the
FM volume level. The volume level will
automatically increase or decrease when
you change the source.

• Before making an adjustment, select the

source you want to adjust.

• “VOL ADJ FIX” appears on the display if

“FM” is selected as the source.

L/O MODE *

11

Line output mode

SUB.W

REAR

: Select if the REAR LINE OUT terminals are

used for connecting a subwoofer (through
an external amplifier).

: Select if the REAR LINE OUT terminals are

used for connecting the speakers (through
an external amplifier).

SUB.W FREQ *

11,

*

12

Subwoofer cutoff
frequency

LOW

MID

HIGH

: Frequencies lower than 72 Hz are sent to the

subwoofer.

: Frequencies lower than 111 Hz are sent to

the subwoofer.

: Frequencies lower than 157 Hz are sent to

the subwoofer.

SUB.W LEVEL *

11,

*

12

Subwoofer level

SUB.W 00 —
SUB.W 08
[ SUB.W 04 ]

: Adjust the subwoofer output level.

BEEP

BEEP ON
BEEP OFF

: Activates the keypress tone.
: Deactivates the keypress tone.

TEL MUTING
Telephone muting

MUTING 1/

MUTING 2

MUTING OFF

: Select either one which mutes the sounds

while using a mobile phone.

: Cancels.

AMP GAIN *

13

Amplifier gain
control

LOW POWER

HIGH POWER

: VOLUME 00 – VOLUME 30 (Select if the

maximum power of each speaker is less than
50 W to prevent damaging the speakers.)

: VOLUME 00 – VOLUME 50

SRC

SELECT

AM *

14

AM station

AM ON
AM OFF

: Enable “AM” in source selection.
: Disable “AM” in source selection.

AUX IN *

15

Auxiliary input

AUX ON
AUX OFF

: Enable “AUX IN” in source selection.
: Disable “AUX IN” in source selection.

*

11

For KD-R412/KD-R411/KD-R312/KD-R311.

*

12

Displayed only when <L/O MODE> is set to <SUB.W>.

*

13

The volume level automatically changes to “VOLUME 30” if you change to <LOW POWER> with the
volume level is set higher than “VOLUME 30.”

*

14

Displayed only when any source other than “AM” is selected.

*

15

Displayed only when any source other than “AUX IN” is selected.

EN10-17_KD-R412_003A_4.indd 16

EN10-17_KD-R412_003A_4.indd 16

10/12/09 9:59:01 AM

10/12/09 9:59:01 AM

Advertising