Whirlpool 1188177 - Manuel (Page 8)

8
Wall sleeve dimensions (W x H x D):
25
⁷⁄₈" x 15¹⁷⁄₃₂" x 16²³⁄₃₂" (65.7 cm x 39.5 cm x 42.5 cm)
1. Remove the front and back covers from the new wall sleeve.
NOTE: Save the covers for future use to seal the wall sleeve if
the air conditioner is removed.
2. See instructions provided with wall sleeve for complete
installation of wall sleeve and grille.
Complete Installation
1. Assemble trim frame by laying the 4 frame pieces face down
on a flat surface and snapping them securely together.
2. Install the
¹⁄₈" insulating foam around the inside edge of the
trim frame. Begin in the bottom left corner and place the
insulating foam around the entire inside of trim frame. Check
to be sure foam is flush with the bottom edge of the trim
frame.
3. Slide the trim frame onto the air conditioner until the foam
makes a seal with the wall sleeve.
A. Width (W)
B. Height (H)
C. Depth (D)
D. Horizontal insulation strip
E. Vertical insulation strip
Insert the 4 - #8 - 32 sheet metal screws (provided)
through the holes in the grille and into the wall sleeve.
A
B
C
D
E
A. Insulating foam seals
B. Trim frame
A. Trim frame against wall sleeve
A
B
B
A