Ommon washing problems, Cont, Troubleshooting – Whirlpool 3967363 Manuel d'utilisation
Page 16
16
TROUBLESHOOTING
C
OMMON WASHING PROBLEMS
(
CONT
.
)
Solution...
•
Plug in power cord.
•
Check electrical source or call
electrician.
•
Replace fuse or reset circuit
breaker. If problem continues,
call electrician.
•
Do not use extension cords.
•
During Spin, the washer will cycle
On and Off. This is normal.
•
Wash smaller loads.
•
Sort lint givers (towels, chenille)
from lint takers (corduroy,
synthetics). Also sort by color.
•
Lint can be trapped in load if
overloaded. Wash smaller loads.
•
Clean out pockets before washing.
•
Use enough detergent to hold
lint in water.
•
Use wash water warmer than 70°F
(21°C).
•
Use wash water warmer than 70°F
(21°C).
•
Loads should move freely during
wash. Wash smaller loads.
•
Do not pour chlorine bleach directly
on load. Wipe up bleach spills.
Undiluted bleach will damage fabrics.
•
Clean out pockets before washing.
Zip zippers before washing.
•
Mend rips and broken threads in
seams before washing.
•
Add fabric softener to the fabric
softener dispenser. Do not drip
fabric softener on clothes.
•
Install an iron filter.
•
Use enough detergent to remove
soil and hold it in suspension.
•
Sort dark clothing from whites and
lights.
•
Unload the washer as soon as it
stops.
Cause...
•
Power cord not plugged in.
•
No power at plug.
•
Fuse blown or circuit breaker open.
•
Using an extension cord.
•
Washer is in Spin status.
•
Washer is overloaded.
•
Improper sorting.
•
Overloading.
•
Paper or tissue in pockets.
•
Not enough detergent.
•
Detergent not dissolving.
•
Wash water colder than 70°F (21°C).
•
Overloading. Improper use of washer.
•
Improper use of chlorine bleach.
•
Sharp items not removed from pockets;
fasteners not fastened.
•
Items damaged before washing.
•
Improper use of fabric softener.
•
Iron (rust) in water.
•
Not enough detergent used, causing soil
to be redeposited.
•
Dye transfer due to not sorting loads
properly.
•
Dye transfer due to not unloading
washer promptly.
Problem...
Washer stops
Residue or lint
on load
Tearing
Stains on load