Manual clean lint filter, Understanding normal washer sounds, Anual clean lint filter – Whirlpool 3967363 Manuel d'utilisation

Page 12: Nderstanding normal washer sounds

Advertising
background image

12

USING YOUR WASHER

Lint filter

M

ANUAL CLEAN LINT FILTER

Clean filter after every load.
1. To remove, grasp the top of the fabric softener

dispenser with both hands. Pull upward to
remove top of fabric softener dispenser. Lint filter
is attached to the end of the shaft.

2. Wash or wipe the lint filter clean.
3. Push lint filter and fabric softener dispenser firmly

back into agitator.

U

NDERSTANDING NORMAL WASHER SOUNDS

Your new washer may make sounds that your old
one didn’t. Because the sounds are unfamiliar, you
may be concerned about them.

The following describes some of the normal sounds
you may hear and what causes them.

During Drain

The rate that water is drained from your washer
depends on your installation. If water is drained quickly
from the washer, you may hear air being pulled
through the pump. This happens during the end of
draining.

After Wash and Before Drain

When the cycle changes from washing to draining,
you may hear a noise as the gearcase shifts.

During Spin

The washer will cycle On and Off.

Advertising