Tektronix Phaser Laser Printers 740L - Manuel (Page 18)

Getting Set Up
10 Phaser 740 and 740L Laser Printers
Phaser 740L printers
The Phaser 740L printer includes only a black toner cartridge in the printer box.
Read the following information, then follow the instructions on page 9 to install
the cartridge.
If you ordered a Phaser 740L Color Kit
■ The Phaser 740L Color Kit (order number Z740LCS) is shipped separately
and includes three color toner cartridges (cyan, magenta, and yellow). The
kit also contains a RealSUPPORT Contract Authorization and converts the
product warranty from 1 year return-to-depot to 1 year on-site for the
remainder of the warranty period.
■ Before installing the color toner cartridges, you must first remove the light
shield. To do this, open the right side door and follow the procedure on the
instruction sheet included in the kit. Discard the light shield after
removing it. Then follow the instructions on page 9 to install all toner
cartridges.
C A U T I O N
Only remove the light shield when converting your Phaser 740L printer to color.
Otherwise, light may damage printer components.
Once you remove the light shield and install toner cartridges in all slots, toner
cartridges are required for proper operation. Otherwise, the front panel will
report an error.
After adding color to the Phaser 740L printer, you can temporarily turn the
printer back to monochrome: in the front panel’s
Printer Defaults menu,
select Black only under the Print Mode menu.
Black
Magenta
Cyan
Magenta
Cyan
3101-27
Black
Remove only when adding optional color
Order 740LCS Color Kit