Omron Healthcare Pedometer with Download Capability HJ-720ITCAN - Manuel (Page 11)

11
BATTERY INSTALLATION
5. Tighten the screw on the battery cover.
NOTES:
• The time setting display will appear on the
screen for approximately 5 minutes after the
battery is inserted.
• After installing the battery, set time of day,
weight and stride length. (Refer to “Setting the
Time” on page 12)
BATTERY REPLACEMENT
Low Battery Indicator
When the Low Battery Indicator appears on the display, remove the old battery.
NOTE:
When the battery indicator starts to blink, the unit stops counting and the time
is displayed as “–:– –”.
Take the battery out with a thin stick that is not easily
breakable.
• DO NOT use a pair of metal tweezers or a screwdriver.
• Replace with a new CR2032 battery.
• Dispose of a battery according to applicable local
regulations.
When the battery is removed from the unit, the time of day and the data stored in
the memory for the current hour will be deleted. The weight, stride length setting
and the data stored in the memory up to the previous hour will not be deleted.
The current day is automatically stored in the memory when the time reaches
0:00. Do not replace the battery at 0:00. For example: If you remove the battery at
23:59 and replace the battery at 0:01 the data for the previous day will be stored
as the current day.
262564 HJ-720.qxd 11/16/06 3:44 PM Page 11