Pioneer XV-DV250 - Manuel (Page 24)

Other connections 06
24
En
Chapter 6
Other connections
Connecting auxiliary
components
This system has both stereo analog inputs and
outputs. Use these to connect external
components, such as your VCR, MD or CD-R
recorder.
1 Connect the LINE (AUDIO IN) jacks to the
analog outputs of an external playback
component.
Connect using RCA pin-plug stereo cables.
2 Connect the LINE (AUDIO OUT) jacks to
the analog inputs of an external recording
component.
These include components such as a cassette
deck, VCR, MD, or another recorder with
analog inputs. Connect using RCA pin-plug
stereo cables.
Recording mode
The Recording mode allows you to make
surround-compatible analog recordings from
the LINE (AUDIO OUT) jacks.
1
Dolby
multichannel sources will be downmixed to
stereo for improved playback with systems that
can provide matrix-decoding (like Dolby Pro
Logic).
1 Press SOUND MODE .
2 Use / (cursor left/right) to select REC
MODE then press ENTER .
3 Use / (cursor up/down) to select
MODE ON or MODE OFF then press ENTER to
confirm.
• MODE ON – Multichannel sources are
downmixed to stereo for recording (the
same downmix is heard through the front
speakers and the subwoofer).
• MODE OFF – For regular multichannel
playback through your speaker system
(only the front left and right channels are
output from the line output).
AUDIO
IN
R
L
OUT
R
L
SPEAKERS
T
R L
R L FRONT
SURROUND
LINE
Y
CB/
PB
CR/
PR
AUDIO
INPUT
AUDIO
OUTPUT
Tape deck, etc.
XV-DV250/350
Note
1 • When Recording mode is on, most sound features cannot be used. The display will briefly blink REC MODE if you try and
use a prohibited function while Recording mode is on.
• When Recording mode is off, the audio from the LINE (AUDIO OUT) jacks may be interrupted, depending on the operation.
• The Recording mode switches off if you change the input function ( DVD/CD , TUNER , etc.) or switch the power off.
XV-DV250-350.book 24 ページ ２００５年１月３０日 日曜日 午後５時５４分