Shutting down, Resuming operation – Panasonic CF-35 Manuel d'utilisation

Page 11

Advertising
background image

11

Shutting Down

Using the suspend function

NOTE

You can use the suspend function by selecting [Suspend]

*

from [Start] menu.

*

[

Suspend] is deleted from the [Start] menu by unchecking [Allow Windows to manage power use on

this computer.] in [Start] - [Settings] - [Control Panel] - [Power] or by unchecking [Show suspend
command on Start menu] in [Advanced].

Power Switch

Using the hibernation function

It is necessary to set the hibernation function using the Setup Utility.

1

Run the Setup Utility

(

page 36)

+

Do not touch the
power switch while
your computer is en-
tering the hiberna-
tion mode.

Power Switch

Suspend Mode

Hibernation Mode

2

Using

and

, select [Power Management] then press

3

Using

and

, select [Power Switch], set [Hibernation]

with

, then press

Close the Setup Utility

(

page 36)

4

Resuming Operation

When operation resumes, serial devices such as a mouse or modem, or your PC Cards
may not work. In such cases, you will need to restart your computer or reinitialize the
individual devices.

If

is displayed upon sliding the power switch, your password has been set (

page 9).

CAUTION

Save all data before powering off your computer.
When restarting from or shutting down to the suspend or hibernation mode, do not
touch the touch pad (or move the mouse (serial or PS/2 type) if one is connected).
There are cases where these devices will fail to operate; you will have to restart
your computer using the keyboard (

page 10).

Do not power off during the following periods (you may corrupt your data or file):
• While the FDD indicator (

), HDD indicator (

) or CD-ROM indicator (

)

(CD-ROM drive is an optional part) is on.

• While playing/recording audio files.
• While communications software is being used.
Do not use the suspend or hibernation function when using an OS other than Win-
dows 95, the diagnostics program (DIAG35), or the Setup Utility, or when experi-
encing static electricity or noise.

If you hold down on the

,

or

to enter the suspend or hibernation

mode, after resuming operation, you must press the same key. For example, if you
hold down on the

key while sliding the power switch, upon resuming, if you

do not press the

key again, only capital letters will result from typing.

If your computer locks up, press the reset button. All data is lost when this button
is pressed.
In the suspend mode, power is consumed. If PC cards (e.g., modem card) are
inserted, more of that power is consumed. When all power has been consumed, all
data at shutdown is lost since it is retained in memory. We therefore recommend
plugging in the AC adapter when using the suspend function.
When the file in the external devices such as a CD-ROM drive, external hard disk,
or ATA cards is opened, the suspend or hibernation function may not work. In such
cases, close the file.
SCSI cards may not recover operation after entering the suspend or hibernation
mode. If this occurs, restart the computer.

CAUTION

Advertising