Panasonic CF-W2 Series XP - Manuel (Page 70)

Hard Disk Data Erase Utility
70
Im
p
o
rt
ant Inf
o
rmat
ion
The computer will restart.
Press the
F2
key while [Panasonic] boot screen is displayed.
The Setup Utility will start up.
Set the Product Recovery DVD-ROM, and execute step D .
D Press the
F10
key.
At the confirmation message, select [Yes] and press the
Enter
key.
The Setup Utility will close, and the computer will restart.
If [Enter Password] is displayed during the following procedure, enter the
Supervisor Password or User Password.
E When the message "Select a number" is displayed, press the
2
key and
perform [2. [Erase HDD]].
(You can cancel this operation by pressing the
0
key.)
The confirmation message will be displayed.
F Press the
Y
key.
Hard Disk Data Erase Utility will start.
(All of the screens below are only examples.)
G When [<<<Start menu>>>] is displayed, press the
Enter
key.
H The approximate time required for erasing data will be displayed.
Press the
Space
key.
I At the confirmation message, press the
Enter
key.
The operation of erasing the hard disk starts.
z If necessary, the “hard disk data erase” operation can be cancelled
after it has begun by pressing the
Ctrl
+
C
key.
If the operation is cancelled before being completed, a part of data will
not be erased.