Inserting / removing the ram module – Panasonic CF-W2 Series XP Manuel d'utilisation

Page 29

Advertising
background image

29

Gett

ing Sta

rte

d

Expanding Memory

Depending on the computer, you can expand the RAM module (sold separately). The
increase in memory will improve the processing speed of Windows and other applica-
tion software. (Effects may differ depending on your usage conditions.)

z

Use recommended RAM module products. Do not use non-recommended RAM
modules. Non-recommended RAM modules may not operate properly, and may
cause damage to your computer. Some non-recommended RAM modules may
overheat, causing the cover to warp. Refer to "Specifications" (

Î

page 72) for rec-

ommended RAM module specifications. Refer to various sources for recommended
RAM module.

z

Matsushita Electric Industrial Co., Ltd. will bear no responsibility whatsoever for fail-
ures or damage caused by the use of non-recommended RAM modules, or by
incorrect installation or removal of such RAM modules. Before installing a RAM
module, confirm the product type and the correct installation method.

CAUTION

z

RAM modules are extremely sensitive to static electricity. There are cases
where static electricity generated by the human body has adversely affected
such RAM modules. When inserting or removing a RAM module, do not touch
the terminals or internal components, insert objects other than the module, or
allow foreign particles to enter. Doing so has been known to cause damage, fire
or electric shock.

‹

Inserting

1

Power off your computer. (

Î

page 24)

z

Do not shut down using the standby or hibernation function.

z

Disconnect the AC adaptor.

2

Turn the computer over, remove the battery pack and the
screw (A), then

A

hold up the cover (B) and

B

pull it out.

(

Î

page 15 “L” of “Names and Functions of Parts”)

z

There is one screw on the cover. Do not confuse this with the cover with
two screws.

z

Use the proper size screw driver to insure that the screw does not get
stripped.

3

Insert the

RAM module.

A

Check direction of a RAM module (C).
Hold the RAM module in the direction that the notch (E) of the RAM
module suits to the protrusion (D) of the slot.

B

Place the RAM module lightly in parallel with a slot.
(The gold terminals (F) are visible)

Inserting / Removing the RAM Module

Advertising