Customizing your machine – Panasonic UF-885 Manuel d'utilisation

Page 38

Advertising
background image

36

24

PRINT REDUCTION

1

Fixed

Selecting print reduction mode.
Fixed: Reduce received document according to setting of

Parameter No. 25.

Auto:

Reduce received document according to the length of
received documents.

*2

Auto

25

REDUCTION RATIO

70

70%

Selecting fixed print reduction ratio from 70% to 100%. This
parameter functions only when fixed print reduction is selected on
Fax Parameter No. 24.

----

----

100

100%

26

POLLING PASSWORD

(----)

Setting a 4-digit password for secured polling. (See page 68)

27

POLLED FILE SAVE

*1

Invalid

Selecting whether the machine retains the polled document in
memory even after the document is polled once.

2

Valid

28

STAMP AT MEM. XMT

1

Invalid

Selecting whether the machine stamps the original documents
when storing the documents into memory.
(depending on the Stamp setting on the Control Panel)

*2

Valid

31

INCOMPLETE FILE

SAVE

*1

Invalid

Selecting whether the machine retains the document in memory if
the document is not successfully transmitted.

2

Valid

32

COPY REDUCTION

1

Manual

Selecting whether the machine performs the copy reduction ratio
automatically or manually.
Manual : The machine will prompt you for the Zoom ratio (100% to

70%) when making copies.

Auto : The machine will automatically determine the reduction

ratio according to the length of the original document.

*2

Auto

33

XMT REDUCTION

1

Invalid

Selecting whether the machine performs reduction when the
transmitting document is wider than the recording paper used at
the receiving machine.

*2

Valid

34

ENERGY SAVER MODE

1

Off

To reduce the power consumption in standby, select either Energy-
Saver or Sleep mode and specify the Delay Time (1 to 120
minutes) for the machine to enter into the selected mode.
The Delay Timer setting is only available in the Energy-Saver or
Sleep Modes.

Off :

The unit will remain in standby mode and
consume more energy than when in Energy-
Saver or Sleep modes.

Energy-Saver Mode: Saves energy by consuming less power than

when in standby mode by turning off the fuser
unit after the specified time.

Sleep

Mode:

This is the lowest power state that the
machine enters after the specified time
without actually turning off. (Sleep Mode is
not available when the optional Parallel Port
Interface Kit, PDL Printer Driver Kit or G3
Communication Port Kit is installed)

2

Energy-Saver

*3

Sleep

Continued on the next page.

No.

Parameter

Setting

Number

Setting

Comments

Customizing Your Machine

Advertising
Ce manuel est liée aux produits suivants: