Panasonic UF-885 - Manuel (Page 158)

156
Print Copy Quality
Vertical lines printing
on the received
document Print out a Journal report (e.g. FUNCTION, 6, 1 , SET and 1)
and check quality to make sure whether your machine has
trouble.
If Journal report quality is OK, your machine has no problem,
report to the sending party that they have a problem.
If copy is NG, replace the Toner Cartridge. 143
16
Fuzzy print 1. Make sure you are using the correct paper for the best
possible print quality.
2. Try reversing the recording paper to the other side.
172
Missing dots or lines/
inconsistent darkness
within print 1. Make sure you are using the correct paper for the best
possible print quality.
2. Replace the Toner Cartridge.
172
16
Fading print Your Toner Cartridge may be running out of toner. Replace
the Toner Cartridge. 16
Faint print You may need to choose a different paper for the best possible
print quality. 172
Intermittent partial or
total black print. Your Optional Page Memory setting value is set larger than the
actual DRAM Memory Card installed. Make sure Fax
Parameter 60 is set to the DRAM Memory Card Size. 38
Communication
No dial tone 1. Check the connection of the telephone line.
2. Check the telephone line. 167
No auto answer 1. Check the connection of the telephone line.
2. Check the Reception mode setting.
3. If the Fax Parameter No. 13 (AUTO JOURNAL PRINT) is
set to "Valid" (default setting) and the machine is printing
the received document from memory, which also happens
to be the 100th transaction, the machine will not auto
answer until the Transaction Journal completes printing.
167
60
Cannot transmit or
receive An information code will be shown on the display. Refer to the
information code table to find out the trouble. 157
No Unit Operation
No unit operation To reset the machine, turn-off the Power Switch for a few
seconds then turn it on again. 21
Mode Symptom Cause / Action page
Troubleshooting