Pioneer FH-P4400 - Manuel (Page 42)

41
Audio Adjustment
Subwoofer Setting Adjustment (80Hz)
When the Subwoofer output is ON, you can adjust the cut-off frequency and the output
level of Subwoofer.
Note:
• You can select the Subwoofer setting mode only when Subwoofer output is switched ON in the
Subwoofer ON/OFF mode.
Front Image Enhancer Function (FIE)
The F.I.E. (Front Image Enhancer) function is a simple method of enhancing front imaging
by cutting mid- and high-range frequency output from the rear speakers, limiting their out-
put to low-range frequencies.
1. Press the AUDIO button and select the F.I.E. mode (FIE) in the Audio
Menu.
Note:
• After switching the F.I.E. function ON, select the Fader/Balance mode in the Audio Menu, and
adjust front and rear speaker volume levels until they are balanced.
• Switch the F.I.E. function OFF when using a 2-speaker system.
“FIE”
2. Switch the F.I.E. function
ON/OFF with the
5/∞ but-
tons.
Precaution:
• When the F.I.E. function is deactivated, the rear speakers output sound of all frequencies, not
just bass sounds. Reduce the volume before disengaging F.I.E. to prevent a sudden increase in
volume.
EQUALIZER CURVE TRK A
SUB-W
3. Increase or decrease the output
level with the
5/∞ buttons.
The display shows “+6” – “–6”.
EQUALIZER CURVE TRK A
SUB-W
2. Select the frequency to 50 Hz,
80 Hz or 125 Hz with the
2/3
buttons.
1. Press the AUDIO button and select the Subwoofer setting mode (80Hz) in
the Audio Menu.